6.112,45 €
Delivery in 3-5 weeks depending on the model and quantity.
130 filtration degree – recommended for the protection of pipes, pumps, irrigation systems.
Other filtration degrees – recommended for industries based on the consumers’ needs.
Most frequently used filtration degrees are 30, 50, 100, 130 and 200, but we can provide you with cartridges anywhere between 30 and 2000 microns.
Screen cartridge – recommended for wheel / drill water. Commonly used to remove sand.
Applications:
Technical specifications:
Inlet/Outlet: 10 inches
Drain flow rate: 10 L/S
Main flow rate: 380 m3/h
Filtration area: 7902 cm2
Details about flow rates and filtration areas can be found here.
Body material: S195T / SS 316L / SS 304L
Screen cartridge: SS 304L, PA6GFR30
Maximum working pressure: 10 bar
Minimum working pressure: 2 bar
Maximum water temperature: 60°C
Back flush operation criteria: time and / or pressure differential
Back flush controlling unit: electronic (AC/DC) control
Filtration degree: 30-2000 microns
Painting method: electrostatic powder coating
Painting material: Epoxy Polyester
Note: information about the filter’s dimensions can be found here.
Working principle
Water enters the filter (1) and passes through a multi-layer filter, then passes coarse sieve (3). Water continues to flow from fine filter to exit (2), creating a layer of pollution on the inner surface of the filter and this pollution creates pressure difference at inlet and outlet of the filter. Backwash begins when this pressure difference comes at a predetermined level. When a specified pressure difference is reached, the backwash control unit opens the discharge valve (9). Atmospheric pressure in the discharge pipe creates a strong backwash. This flow returns the cleaning collector through cleaning collector (7), hydraulic turbine (8) and drainage pipe after vacuuming the pollution in the inner surface of filter by creating a vacuum effect at nozzles (6). Pressure decreases which occurs at hydraulic turbine (5) and drainage of the piston (10), provides a linear motion to the cleaning collector. This rotation and linear motion provides absorption of the pollution layer in the inner surface of the filter by nozzles. When the process is completed, the cleaning collector automatically makes a second backwash and returns to its original position, so the washing process is completed. During backwash filtering process continues. For efficient work of the system, during the backwash process inlet pressure must not be less than 2 Bar (29PSI).
Other information:
Warranty: two years for natural persons and a year for legal persons.
Reviews
There are no reviews yet.